Which aspect should we pay attention to when operating the electric hydraulic pump?

General conventional electric hydraulic pump rated temperature, its working temperature is 80 degrees Celsius, its rated pressure is 1.6MPa; And the use of the equipment temperature should not be greater than 350℃; If the pump body of the electric hydraulic pump has non-metallic materials, its use temperature can not exceed 60 degrees Celsius, and its rated pressure is 0.6MPa, the following Xiaobian to introduce you in the operation of the electric hydraulic pump should pay attention to what information:
1. Before use, check the touching mouth between the hydraulic clamp body and the top cover. When the hydraulic clamp body has cracks, it can not be used.
2. After starting the hydraulic press, it is necessary to run no-load first, check the operation status of each part, and so on. When the piston of the crimping pliers takes off and falls, the human body shall not sit above the crimping pliers.
3. When placing the top cover, the top cover is required to be in line with the clamp body, and cannot be crimped without rotation in place.
The 4 hydraulic pump operator should closely cooperate with the crimping clamp operator, and pay attention to the pressure indication, no load.
Its 5 is not easy to adjust the hydraulic pump safety relief valve.
In the use of electric hydraulic pump, it is necessary to pay attention to the electric hydraulic pump conveying medium density should not be greater than 1300kg/m3, and viscosity is not greater than 30×10-6m3/S does not contain ferromagnetic and fiber liquid.